Ghost 2 Immobiliser Reviews
The Ghost 2 immobiliser utilizes modern technology to stop car theft. The device is hidden by thieves and only turns on the engine after a PIN or app is entered.
It connects to the CAN data network in your vehicle and is weatherproof. It comes with a service/valet feature that allows you to temporarily start your car when it is in garage.
Easy to install
The Ghost immobiliser is a cutting-edge security gadget that shields your vehicle from hacking, cloning, and key theft. It is a unique PIN code system integrated with the car's ECU which makes it extremely difficult for thieves to identify or alter. Unlike traditional immobilisers, it doesn't require special keys or sensors, and is completely hidden with no LED indications or signals that signal its presence. It is also cheaper than replacing an ECU or installing a new key fob and could lower the cost of your monthly insurance.
When installing a Ghost 2 immobiliser, be sure to follow the instructions of the manufacturer carefully. This will ensure that the device works correctly and effectively. After the installation is completed, test the system by entering the PIN code, then turning on the engine. Regular testing will help you identify any issues before they become worse.
Before you begin the installation, double-check the location of the CAN H and CAN L wires. They are essential for powering the immobiliser so it is crucial to connect them correctly. It is also recommended to label the wires to make it easier to identify them during the installation process. Once you have identified the locations of these wires, connect them to a constant 12V power source and a grounding point. Make sure to utilize a fuse tap if required to shield the connections from short circuits or damage.
After connecting the wires, neaten the wiring using cable ties to avoid potential tampering. You can also cover the connections using insulation tape or heat-shrink tubing. This will help protect them from electrical shorts and extend the life of the device. Once the wiring is secure it's a good idea to test the Ghost 2 immobiliser.
The Ghost 2 immobiliser offers a service mode for situations in which you may have to sell your vehicle like when it is being serviced or valet parked. This will disable the PIN sequence temporarily. To activate this feature, simply press the brake pedal while holding down the accelerator, and press a number of times that is equal to the first digit of the emergency code. The system will then go into service mode, which can be verified by flashing the indication signal 5 times.
It is simple to change PIN codes
It is easy to protect your vehicle from theft by installing a ghost 2 immobiliser. It is hidden inside the vehicle and can only be accessed by a unique code. The device is directly connected to the vehicle ECU via its data bus. It does not use radio frequency signals like traditional Thatcham immobilisers or aftermarket alarm systems. This makes it difficult for thieves to listen for the click of an immobiliser relay, or to add new key fobs. The control unit is hidden within the wiring harness or dashboard, and is not physically accessible to reset the system.
The ghost 2 immobiliser connects to your vehicle's CAN Data network and uses the buttons already present on the steering wheel, door panels and the central console to generate an individual sequence of up 20 button presses that must be entered prior to the engine can start - just like a PIN code. This next-generation system does not require cutting of wires during installation and is fully reprogrammable at any time. You can even start your car in either Service or Valet mode when you give it to a mechanic complete the work.
The application can also be used to block your PIN code in the event that you've lost your keys or change it. This feature is especially useful if you have given your car to a third party to be used as a valet or service because it prevents them from starting your car and driving it away without your consent. It's also unnoticeable by professional thieves because it doesn't use radio frequencies or circuit cuts.
Another excellent feature of the ghost 2 immobiliser is its ability to prevent relay thefts. Relay theft is one of the most popular methods of car theft. Criminals can hack your car's diagnostic ports and then alter the signal transmitted by the car's ECU to convince it that the car's key is valid and present. The immobiliser of the traditional model can be manipulated in this way, but with the ghost 2 immobiliser the signal is blocked by the immobiliser prior to it gets to the ECU.
Simple to use app
Ghost 2 is a revolutionary immobiliser that safeguards your car from key-cloning, hacking, and key theft. It connects to the CAN data network in your vehicle and demanding that you enter a PIN number before it will start the engine. It also prevents thieves using signal spoofing or device spoofing that are popular methods of stealing vehicles.
The system is easy to use and functions like a standard auto alarm. Once you have installed it, you are able to create a unique PIN sequence that is up to 20 digits in length, which will have to be entered before the vehicle is started. This will stop your vehicle from being stolen, even if you lose your keys. You can disable the system with an app for your smartphone.
In contrast to other systems it is completely silent and does not emit any radio frequency signals. It is a quiet, weatherproof device that can be positioned anywhere in your vehicle. It can be concealed under the dash, steering wheel, or on the door panels. It communicates with your ECU via the CAN data circuit and is not affected by diagnostic tools, which some thieves use to find security systems. It is also not affected by jamming devices which spoof codes.
It is a covert installation that doesn't require any cutting of wires or modifications to the vehicle and can be utilized as an anti-theft system for all cars. The technology has been proven efficient, and it is in line with TASSA Standards. The ghost is a great solution for classic, sports and luxury cars. It can be used to safeguard cars that are let out on websites like Turo.
The Autowatch Ghost 2 is the next generation of vehicle immobilisers. The system is inaccessible to thieves and blocks them from starting your car until they have your PIN or are authorised by the app. It does not emit radio frequencies or other signals scanners could detect. Installation is quick and easy. The app is simple to navigate and offers a user-friendly interface which makes it easy to configure and use. It also comes with an GPS tracker to assist police locate and recover the vehicle.
Simple to reset
A ghost 2 immobiliser is an excellent method to guard your car from being stolen. It is integrated into your vehicle's ECU and creates a security barrier that thieves cannot penetrate without the right pin. The device is also TASSA-verified, which means that it is recognized by insurance companies. It's a useful tool to deter theft of your car and could save you money in the long run.
Unlike traditional alarm/immobilisers that require cutting of circuits, the Ghost system is directly connected to the vehicles CAN data network. It works by with the existing buttons on the dashboard and the steering wheel. You can set up a unique PIN sequence that can be up to 20 presses in length. This PIN has to be entered before the engine can begin like the credit card's PIN. Ghost is inaccessible to thieves, and there are no LED indicators to give away its presence, which makes it the most efficient aftermarket CAN bus immobiliser that is on the market today.
Another benefit of the Ghost system is that it does not utilize radio frequency signals, meaning it isn't detected or scanned by thieves. This can prevent the cloning of keys and relay attacks and also the more usual method of hacking a car's CAN bus system by looking for signals from its alarm/immobiliser. In visit the following post to that, the Ghost system is designed to be completely hidden in your vehicle. There aren't any lights or other signals that signalize its presence.
The system also has an option for a Transport Mode that disables the Ghost system, which is useful for situations when you need to temporarily disable it, like during transportation or servicing. This mode is not as effective as Service Mode as it doesn't deactivate the Ghost system if you exceed 31 mph within 15 minutes.
To reset your ghost 2 immobiliser, you will need to have the emergency code, which you can obtain from your installer. It is usually hidden under an area for scratch-offs on the card included with the installation. You should keep the emergency code secure and store it in a safe place that is secure, like your wallet at home.